No products
SAE AMS6514GSteel, Maraging, Bars, Forgings, Tubing, and Rings 18.5Ni 9.0Co 4.9Mo 0.65Ti 0.10Al Consumable Electrode Vacuum Melted, Annealedstandard by SAE International, 07/13/2010
SAE AMS6512FSteel, Bars, Forgings, Tubing, and Rings 18Ni 7.8Co 4.9Mo 0.40Ti 0.10Al Consumable Electrode Vacuum Melted, Annealedstandard by SAE International, 07/13/2010
SAE AMS6499Steel, Bars, Forgings, and Tubing, 2.7Si - 0.85Cr - 1.8Ni - 0.4Mo - 0.2V - (0.37 - 0.44C) Double Vacuum Meltedstandard by SAE International, 07/13/2010
SAE AMS6477BSteel Bars, Forgings, and Tubing, 0.80Cr (0.90 - 1.03C), For Bearing Applicationsstandard by SAE International, 07/13/2010
SAE AMS5410BNickel Alloy, Corrosion and Heat Resistant, Investment Castings 61Ni - 16Cr - 8.5Co - 1.8Mo - 2.6W - 0.85Cb - 3.4Ti - 1.8Ta - 3.4Al - 0.010B - 0.05Zr Vacuum Melted, Vacuum Cast As Cast, or Solution Treated, or Solution and Precipitation Hardenedstandard by SAE International, 07/13/2010
SAE AMS4989BTitanium Alloy Sheet, Strip, and Plate, 3Al - 2.5V, Annealedstandard by SAE International, 07/13/2010
SAE AS1007HFitting, Union, Standard and Reducer, Bulkhead, Flarelessstandard by SAE International, 07/08/2010
SAE AMS3337ESilicone (PVMQ) Rubber Extreme-Low-Temperature Resistant 65 - 75standard by SAE International, 07/13/2010
SAE AS5551AFitting Assembly â 24 Degree Cone Flareless per AS5827, 5080 psi, Port Connection Port Preparation, Installation and Removal of AS5550 and AS5865standard by SAE International, 07/12/2010
SAE J2873_201007Electric Drive Cooling Fan Motor Mountingstandard by SAE International, 07/08/2010
SAE AS39029/60ACONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED, SIZE 8 (FOR MIL-DTL-38999 SERIES I, III, AND IV CONNECTORS)standard by SAE International, 07/07/2010
SAE J2577_201007Heavy Duty Lamp Electrical Connector Standardstandard by SAE International, 07/07/2010