GMW14190

Description / Abstract: GMW14190, 3rd Edition, April 2017 - Rear Window Trim

Introduction

Note: Nothing in this standard supercedes applicable laws and regulations.

Note: In the event of conflict between the English and domestic language, the English language shall take precedence.

Purpose. This specification establishes performance requirements, design constraints, and validation requirements for a Rear Window Trim Subsystem.

Applicability. All Rear Window Trim Subsystems except hard trim.

Remarks.

Classification. The Rear Window Trim Subsystem is listed under the following: Uniform Parts Classification (UPC), Functional Name Address (FNA) and Bill of Material (BOM) nomenclature.

• UPC = 1C4M FNA = 0890A (Notchback (NB) Vehicle Rear Window Trim).

• UPC = 1C4J FNA = 6000A (Hatchback (HB) Vehicle Removable Rear Window Trim).

• BOM Row = 40.03:06 Rear Window Trim.

The Rear Window Trim (RWT) Subsystem Technical Specification is a General Motors global document. All requirements herein shall be adhered to as GM Global Requirements for the Rear Window Trim Subsystem except where noted for specific GM Programs. Removable Rear Window Trim for Hatchback Vehicle should meet GMW14580 besides this document.

Order of Precedence. The requirements established in this document override the referenced general test procedure requirements, when the test procedure also has published requirements. Statement of Requirements (SOR) Appendix C2 requirements update the requirements in this document.