No products
BS AU 156:1971Recommendations for aiming of headlamps and auxiliary lamps on motor vehiclesstandard by BSI Group, 09/13/1971
BS 1438:1971Specification for media for biological percolating filtersstandard by BSI Group, 09/07/1971
BS 1344-6:1971Methods of testing vitreous enamel finishes. Resistance to alkalistandard by BSI Group, 08/31/1971
BS 2L 93:1971Specification for plate of aluminium-copper-magnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7 , Mn 0.8)standard by BSI Group, 08/31/1971
BS 2L 87:1971Specification for hexagonal bars for nuts, couplings and hollow machined parts of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (free from peripheral and asymmetric coarse grain) (not less than 14 mm nor more than 36 mm across flats) (Cu 4.4, Mg 0.5,...
BS 2L 85:1971Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-silicon-magnesium alloy (solution treated and precipitation treated) (Cu 1.5, Si 1, Mg 0.8)standard by BSI Group, 08/31/1971
BS 2L 83:1971Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-nickel-magnesium-iron-silicon alloy (solution treated and precipitation treated) (Cu 2, Ni 1, Mg 1, Si 0.9, Fe 0.9)standard by BSI Group, 08/31/1971
BS 2L 77:1971Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)standard by BSI Group, 08/31/1971
BS 3L 86:1971Specification for wire for solid, cold-forged rivets of aluminium-copper-magnesium alloy (not exceeding 10 mm diameter) (Cu 2.5, Mg 0.3)standard by BSI Group, 08/31/1971
BS 3L 63:1971Specification for tube of aluminium-copper-mangesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)standard by BSI Group, 08/31/1971
BS 3L 58:1971Specification for wire for solid, cold-forged rivets of aluminium-5% magnesium alloy (not exceeding 10 mm diameter)standard by BSI Group, 08/31/1971
BS 2L 98:1971Specification for plate of aluminium-copper-magnesium-manganese alloy (solution treated and aged at room temperature: not controlled stretched) (Cu 4.4, Mg 1.5, Mn 0.6)standard by BSI Group, 08/31/1971