No products
SAE AS3416ABOLT, MACHINE - HEXAGON HEAD, PD SHANK UNS N07718, .3750-24 UNJF-3A (STRESS RUPTURE RESISTANT)standard by SAE International, 09/02/2011
SAE AS21981FERRULE, INNER, UNINSULATED, SHIELD TERMINATING , TYPE I, TWO PIECE, CLASS I, FOR SHIELDED CABLESstandard by SAE International, 09/06/2011
SAE J2453_201109Manual Transmission and Transaxle Efficiency and Parasitic Loss Measurement (Stabilized: Sep 2011)standard by SAE International, 09/02/2011
SAE J1094_201109Constant Volume Sampler System for Exhaust Emissions Measurement (Stabilized: Sep 2011)standard by SAE International, 09/01/2011
SAE AMS3587EPlastic Tubing, Electrical Insulation Irradiated Polyolefin, Pigmented, Very Flexible, Heat-Shrinkable Low Recovery Temperature 2 to 1 Shrink Ratio (Stabilized: Sep 2011)standard by SAE International, 09/01/2011
SAE AS31821ACOVER, PROTECTIVE, ELECTRONIC CONNECTOR, PLUG, PUSH-PULL COUPLINGstandard by SAE International, 09/01/2011
SAE AMS3960Advanced Composites Prepreg - Nominal 250 °F Cure - Carbon Fiber and Epoxy Resin, Unidirectional Tapestandard by SAE International, 09/01/2011
SAE AMS3588EPlastic Tubing, Electrical Insulation Irradiated Polyolefin, Clear, Very Flexible, Heat-Shrinkable 2 to 1 Shrink Ratio (Stabilized: Sep 2011)standard by SAE International, 09/01/2011
SAE J848_201109Fifth Wheel Kingpin, Heavy-Duty - Commercial Trailers and Semitrailers (Stabilized: Sep 2011)standard by SAE International, 09/01/2011
SAE J2836/2_201109Use Cases for Communication between Plug-in Vehicles and Off-Board DC Chargerstandard by SAE International, 09/01/2011
SAE J2594_201109Recommended Practice to Design for Recycling Proton Exchange Membrane (PEM) Fuel Cell Systems Superseding J2594 SEP2003 (Stabilized: Sep 2011)standard by SAE International, 09/01/2011
SAE J2574_201109Fuel Cell Vehicle Terminology (Stabilized: Sep 2011)standard by SAE International, 09/01/2011