No products
SAE AS115651BSCREW - FLAT FILLISTER HEAD, DRILLED SHANK, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN., .2500-28 UNF-3A (Stabilized: May 2014)standard by SAE International, 05/22/2014
SAE AS115501BSCREW ¿¿¿ FLAT FILLISTER HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN. .3125-24 UNF-3A (Stabilized: May 2014)standard by SAE International, 05/22/2014
SAE AS115451CSCREW ¿¿¿ FLAT FILLISTER HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN. .2500-28UNF-3A (Stabilized: May 2014)standard by SAE International, 05/22/2014
SAE AS115401BSCREW ¿¿¿ FLAT FILLISTER HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN. .1900-32 UNF-3A (Stabilized: May 2014)standard by SAE International, 05/22/2014
SAE J1531_201405Seam Damage Test Procedurestandard by SAE International, 05/20/2014
SAE AMS4331Aluminum Alloy Extrusions 7.8Zn - 2.6Mg - 2.0Cu - 0.10Zr - (7068-T6511) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treatedstandard by SAE International, 05/19/2014
SAE AMS6491ESteel Bars, Forgings, and Tubing 4.1Cr - 4.2Mo - 1.0V (0.80 - 0.85C) (M-50) Premium Aircraft-Quality for Bearing Applications, Double Vacuum Meltedstandard by SAE International, 05/19/2014
SAE AMS4133EAluminum Alloy Forgings and Rolled Rings 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treatedstandard by SAE International, 05/19/2014
SAE AMS4118LAluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si (2017; -T4, -T451) Solution Heat Treatedstandard by SAE International, 05/19/2014
SAE AMS4027NAluminum Alloy, Sheet and Plate 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treatedstandard by SAE International, 05/16/2014
SAE AIR6160Magnesium Alloys in Aircraft Seats - Developments in Magnesium Alloy Flammability Testingstandard by SAE International, 05/16/2014
SAE AMS4026MAluminum Alloy, Sheet and Plate 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T4 Sheet, -T451 Plate) Solution Heat Treated and Naturally Agedstandard by SAE International, 05/16/2014