No products
SAE AMS5842GCobalt-Nickel Alloy, Corrosion and Heat-Resistant, Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated and Work Strengthenedstandard by SAE International, 06/06/2016
SAE AMS5841GCobalt-Nickel Alloy, Corrosion and Heat-Resistant, Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated for Work Strengtheningstandard by SAE International, 06/06/2016
SAE AMS5655FSteel, Corrosion and Heat Resistant, Bars, Wire, and Forgings 12.5Cr - 0.75Ni - 1.0Mo - 1.0W - 0.24V (0.20-0.25C) Hardened and Temperedstandard by SAE International, 06/06/2016
SAE AMS4357Aluminum Alloy, Die Forgings 3.5Cu ¿¿¿ 1.0Li - 0.04Mg ¿¿¿ 0.35Mn ¿¿¿ 0.45Ag ¿¿¿ 0.12Zr (2050-T852) Solution Heat Treated, Cold Worked and Artificially Agedstandard by SAE International, 06/06/2016
SAE AIR1589BAircraft Damage Caused by Ground Support Equipmentstandard by SAE International, 06/06/2016
SAE J2087_201606Daytime Running Lightstandard by SAE International, 06/03/2016
SAE J2192_201606Recommended Testing Methods for Physical Protection of Wiring Harnessesstandard by SAE International, 06/03/2016
SAE AMS2355LQuality Assurance, Sampling and Testing Aluminum Alloys and Magnesium Alloy Wrought Products (Except Forging Stock), and Rolled, Forged, or Flash Welded Ringsstandard by SAE International, 06/02/2016
SAE ARP4072ASafety Considerations of Carry-On Baggage Relating to the Emergency Evacuation of Transport Category Aircraftstandard by SAE International, 05/31/2016
SAE EIA681Assessment Guide for Process Certification (Stabilized: May 2016)standard by SAE International, 05/31/2016
SAE EIA555Lot Acceptance Procedure for Verifying Compliance With the Specified Quality Levels (SQL) in PPM (Stabilized: May 2016)standard by SAE International, 05/31/2016
SAE EIA554_2Assessment of Nonconforming Levels In Parts Per Million (PPM) (Stabilized: May 2016)standard by SAE International, 05/31/2016