No products
SAE AMS4988DTitanium Alloy Sheet, Strip, and Plate 6Al - 6V - 2Sn Solution Heat Treatedstandard by SAE International, 08/08/2018
SAE AMS4937ETitanium Alloy, Extrusions and Flash Welded Rings 6Al - 6V - 2Sn Beta Extruded Plus Annealed, Heat Treatablestandard by SAE International, 08/08/2018
SAE AMS4902LTitanium Sheet, Strip, and Plate Commercially Pure Annealed 40.0 ksi (276 MPa) Yield Strengthstandard by SAE International, 08/08/2018
SAE AMS4898ETitanium Alloy, Sheet 6Al - 2Sn - 2Zr - 2Mo - 2Cr - 0.15Si Annealedstandard by SAE International, 08/08/2018
SAE AMS4373Aluminum Alloy, Rolled, Drawn or Cold Finished Bar, Rod, and Wire 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si (2017; -O or when ordered -F)standard by SAE International, 08/08/2018
SAE AMS4247CAluminum Alloy, Hand Forgings 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T7352) Solution Heat Treated, Stress Relieved by Compression, and Precipitation Heat Treatedstandard by SAE International, 08/08/2018
SAE AMS3224ANitrile-Butadiene Rubber Fuel, Fire, and Ozone Resistant 65 ¿¿¿ 75standard by SAE International, 08/08/2018
SAE AMS3200LButadiene Acrylonitrile (NBR) Rubber Petroleum-Base Hydraulic Fluid Resistant 55 - 65standard by SAE International, 08/08/2018
SAE AMS2759/2HHeat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 MPa) and Higherstandard by SAE International, 08/08/2018
SAE AMS2630DInspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thickstandard by SAE International, 08/08/2018
SAE AMS2632BInspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 mm) and Under in Cross-Sectional Thicknessstandard by SAE International, 08/08/2018
SAE AIR5797AAircraft Tire Wear Profile Development and Execution for Laboratory Testing (Stabilized: Aug 2018)standard by SAE International, 08/06/2018