No products
SAE AMS4418GMagnesium Alloy, Sand Castings, 2.5Ag 2.1Di 0.70Zr (QE22A-T6), Solution and Precipitation Heat Treatedstandard by SAE International, 11/24/2004
SAE AS81934/2ABEARING, SLEEVE, FLANGED, SELF-LUBRICATING, ¿¿¿65 ¿¿F TO 325 ¿¿Fstandard by SAE International, 11/24/2004
SAE J1842_200411Disc Wheel Hub/Spoke Wheel and Axle Interface Dimensions--Commercial Vehiclesstandard by SAE International, 11/22/2004
SAE J277_200411Maintenance of Design Voltage-Snowmobile Electrical Systemsstandard by SAE International, 11/22/2004
SAE AS4492Survivor Locator Lightsstandard by SAE International, 11/18/2004
SAE AS83413/8AConnectors and Assemblies, Electrical, Aircraft Grounding: Type Iv Jumper Cable Assembly, Lead, Electricalstandard by SAE International, 11/17/2004
SAE AMS5377FNickel Alloy, Corrosion and Heat Resistant, Investment Castings 73ni 12cr 4.5mo 2.0cb 0.70ti 0.05c 6.0al 0.010b 0.10zr, Vacuum Cast, as Caststandard by SAE International, 11/17/2004
SAE J 1737Test Procedure to Determine the Hydrocarbon Losses from Fuel Tubes, Hoses, Fittings, and Fuel Line Assemblies by Recirculationstandard by SAE International, 11/17/2004
SAE AMS4186CAluminum Alloy, Bars, Rods, and Wire, Rolled or Cold Finished, 5.6Zn 2.5Mg 1.6Cu 0.23Cr, As Fabricatedstandard by SAE International, 11/16/2004
SAE J 1393Heavy Duty Vehicle Cooling Test Code Rstandard by SAE International, 11/11/2004
SAE AS13441ATest Methods for Electrical Connectorsstandard by SAE International, 11/11/2004
SAE AS 4877BBolts and Screws, Nickel Alloy UNS N07718, Classification: 185 ksi/1200 \mDF, Procurement Specificationstandard by SAE International, 11/08/2004