No products
SAE ARP9536Declarable Substances Recommended Practicestandard by SAE International, 03/28/2008
SAE AMS4235BAluminum Alloy Castings, 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T71), Solution and Precipitation Heat Treatedstandard by SAE International, 03/27/2008
SAE AMS5864CSteel, Corrosion-Resistant, Plate, 13Cr - 8.0Ni - 2.2Mo - 1.1Al, Vacuum Induction Plus Consumable Electrode Melted, Solution Heat Treated, Precipitation Hardenablestandard by SAE International, 03/27/2008
SAE AMS5708KNickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 58Ni 19.5Cr 13.5Co 4.3Mo 3.0Ti 1.4Al Consumable Electrode or Vacuum Induction Melted 1975°F (1079°C) Solution Heat Treatedstandard by SAE International, 03/27/2008
SAE AMS5707LNickel Alloy, Corrosion and Heat Resistant, Bars, Forgings and Rings 58Ni 19.5Cr 13.5Co 4.3Mo 3.0Ti 1.4Al 0.05Zr 0.006B Consumable Electrode or Vacuum Induction Melted 1825 to 1900°F (996 to 1038°C) Solution, Stabilization, and Precipitation Heat Treatedstandard by SAE International,...
SAE AMS5704JNickel Alloy, Corrosion and Heat Resistant, Forgings 57Ni 19.5Cr 13.5Co 4.3Mo 3.0Ti 1.4Al 0.05Zr 0.006B, Consumable Electrode or Vacuum Induction Melted, 1825 to 1900°F (996 to 1038°C) Solution, Stabilization, and Precipitation Heat Treatedstandard by SAE International, 03/27/2008
SAE ARP5577Aircraft Lightning Direct Effects Certificationstandard by SAE International, 03/26/2008
SAE AMS5779EAlloy Welding Electrodes, Covered, Corrosion and Heat-Resistant, 75Ni - 15Cr - 1.5 (Cb+Ta) - 1.9Ti - 0.55Al - 5.5Festandard by SAE International, 03/26/2008
SAE AMST21014ATungsten Base Metal, High Densitystandard by SAE International, 03/26/2008
SAE AMS5696DSteel, Corrosion and Heat-Resistant, Welding Wire, 19Cr - 12.5Ni - 2.5Mo, High Ferrite Grade (Noncurrent: Mar 2008)standard by SAE International, 03/26/2008
SAE AIR5464Metal Clad Fibers for Electrical Shielding & Harness Overbraidstandard by SAE International, 03/25/2008
SAE AS81820CBearings, Plain, Self-Aligning, Self-Lubricating, Low Speed Oscillationstandard by SAE International, 03/25/2008