No products
SAE J1349_201109Engine Power Test Code - Spark Ignition and Compression Ignition - As Installed Net Power Ratingstandard by SAE International, 09/20/2011
SAE J2594_201109Recommended Practice to Design for Recycling Proton Exchange Membrane (PEM) Fuel Cell Systems (Stabilized: Sep 2011)standard by SAE International, 09/20/2011
SAE AMS2434DPlating, Tin-Zinc Alloystandard by SAE International, 09/19/2011
SAE AS22520/3ACrimping Tools, Terminal, Hand, Wire Termination, Inspection Gage for Type I and II Toolsstandard by SAE International, 09/19/2011
SAE AMS6350MSteel Sheet, Strip, and Plate, 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)standard by SAE International, 09/19/2011
SAE AMS5441ANickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings Ni - 18Cr - 2.8Mo - 5.5Cb(Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated, Precipitation-Hardenablestandard by SAE International,...
SAE AMS4455FMagnesium Alloy, Investment Castings 10A1 (AM100A-T6) Solution and Precipitation Heat Treatedstandard by SAE International, 09/19/2011
SAE AMS4452DMagnesium Alloy, Investment Castings 8.7Al 0.70Zn 0.22Mn (AZ 91C-T6) Solution and Precipitation Heat Treatedstandard by SAE International, 09/19/2011
SAE ARP1384DPassenger Safety Briefing Materialsstandard by SAE International, 09/15/2011
SAE J2836/2_201109Use Cases for Communication between Plug-in Vehicles and Off-Board DC Chargerstandard by SAE International, 09/15/2011
SAE AMS2773CHeat Treatment Cast Nickel Alloy and Cobalt Alloy Partsstandard by SAE International, 09/13/2011
SAE J 2031High Tension Ignition Cablestandard by SAE International, 09/13/2011