No products
SAE AMS5755FNickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 64Ni - 5.0Cr - 24.5Mo - 5.5Fe, Solution Heat Treatedstandard by SAE International, 08/21/2002
SAE AMS5409ACastings, Alloy-Investment, 61ni 16cr 8.5co 1.8mo 2.6w 0.8cb 3.4ti 1.8ta 3.4al 0.010b 0.06zr (0.03-0.08c), Vacuum Melted, Vacuum Cast, as Caststandard by SAE International, 08/21/2002
SAE AMS5567ESteel, Corrosion Resistant, Seamless or Welded Hydraulic Tubing, 19Cr - 10Ni (SAE 30304), Solution Heat Treatedstandard by SAE International, 08/21/2002
SAE J1247_200208Simulated Mountain-Brake Performance Test Procedurestandard by SAE International, 08/20/2002
SAE AMS4324Aluminum Alloy, Extruded Rod, Bar and Profiles (7055-T74511), 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr, Solution Heat Treated, Stress-Relieved, and Overagedstandard by SAE International, 08/21/2002
SAE AMS7878CTungsten Carbide Powder, Cobalt Coatedstandard by SAE International, 08/20/2002
SAE ARP5507Aircraft Tire-to-Wheel Performance Characteristicsstandard by SAE International, 08/19/2002
SAE J1099_200208Technical Report on Low Cycle Fatigue Properties Ferrous and Non-Ferrous Materialsstandard by SAE International, 08/13/2002
SAE AIR1176BOxygen System and Component Cleaning and Packagingstandard by SAE International, 08/13/2002
SAE AS6625ASpray Equipment, Aircraft Windshield, Anti-Icingstandard by SAE International, 08/08/2002
SAE AS8181ADetector, Ice, Air Intake Duct, Aircraft Engines and Airframe Systems, General Specification Forstandard by SAE International, 08/07/2002
SAE EIA731_1Systems Engineering Capability Modelstandard by SAE International, 08/01/2002